Description
CAN-PCI/266
Passive 66 MHz PCI-CAN-Interface
PCI-CAN interface with 1 OR 2 CAN channels
PCI 2.2 interface, 32 bit, 66 MHz at 3.3 V signal voltage or 33 MHz at 5.0 V
CAN controller SJA1000 (CAN 2.0 A/B)
CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s
Attention: Passive CAN module without a microcontroller on board - the performance may be limited by the host system!
Suitable for CANOpen and J1939.
Powerful CAN Interface for PCs
The module CAN-PCI/266 is a low cost PC board designed for 66 MHz PCI bus systems that uses a PCI bus width of 32 bits or in 33 MHz PCI bus systems at a bus speed of 33 MHz.
CAN Interface
The fully ISO 11898 compliant CAN interface allows a data transfer rate of 1 Mbit/s. It is opto-isolated, and, among many other features, it has the ability to set the bit rate through the software.
Software Support
Software drivers are available for Windows, Linux, QNX and other operating systems upon request.
Please note: The performance of the host CPU may limit the maximum effective CAN bit rate value because this is a passive CAN module without a microcontroller on-board.
Technical Specifications
PCI Interface:
PCI bridge PLX PCI9056
Specification PCI 2.2
Bus speed 66 MHz at 3.3 V signal voltage or 33 MHz at 3.3 or 5.0 V signal voltage
CAN:
CAN controller SJA1000, CAN 2.0A/B
CAN interface differential, electrically isolated, 1 Mbit/s, ISO11898, option DeviceNet
General:
Temperature 0...50o C
Humidity max. 90%, non-condensing
Supply voltage 3.3 VDC and 5 VDC
Connectors CAN - 9-pole DSUB (male)
LEDs 4 status LEDs
