Description
HPE Smart Array P408i-a SR G10 RAID SAS 12Gb/s for DL360 804334-001 836260-001
Condition: The unit has been inspected, cleaned, repaired if needed. Is in very good condition, full working order.
Compeve SKU: 101000344013
Specification:
Storage interface (SAS/SATA)
8 SAS lanes across 2x4 internal Mini-SAS ports
12 Gb/s SAS, 6 Gb/s SATA technology
Mix-and-match SAS and SATA drives to the same controller
Support for SAS tape drives
2GB FBWC
PCI Express 3.0 x8 link
RAID 0, 1, 5, 6, 10, 50, 60, 1 Advanced Data Mirroring (ADM), 10 ADM
Mixed mode (RAID logic drives and HBA physical drives simultaneously)
Legacy and UEFI boot operation
UEFI System Utilities (Storage configuration)
Up to 238 physical drives
Up to 64 logical drives
HPE Smart Array SR SmartCache (Optional license)
HPE Smart Array SR Secure Encryption (Optional license)
HPE SSD Smart Path
Rapid Parity Initialization (RPI)
Rapid rebuild
Drive sanitize
Performance optimization degraded reads and read coalescing
Power efficiency
Seamless upgrades from HPE Smart Array S-class and E-class controllers
FIPS 140-2 Level 1 Implementation Under Test
Ports
Internal: 8 SAS/SATA lanes across 2 x4 Mini-SAS ports
Performance
12 Gb/s SAS (1200 MB/s theoretical bandwidth per SAS lane)
6 Gb/s SATA (600 MB/s theoretical bandwidth per SAS lane)
PCI Express 3.0 x8 link width
2GB 72-bit wide DDR4-2100 FBWC provides up to 16.8 GB/s maximum cache bandwidth
Read ahead caching
Write-back caching
Array configuration features
Expand Array
Heal Array
Move Drives
Re-Mirror Array
Shrink Array
Spare Management
Split Mirrored Array
Logical drive configuration features
Extend Logical Drive
Instant Secure Erase
Migrate RAID/Stripe Size
Modifying Cache Write Policy
Move Logical Drive
Re-enable Failed Logical Drive
Fault prevention
The following features offer detection of possible failures before they occur, allowing preventive actionto be taken
Predictive drive failure detects possible drive failure before it occurs, allowing replacement ofthe component before failure occurs.
Background surface scan checks drives during inactive periods and automatically remaps badsectors, ensuring data integrity.
HPE Smart SSD Wear Gauge reports the amount of lifetime remaining on users SSDs.
Fault recovery
Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure
Recovery ROM: This feature protects the user from a firmware image corruption by storing aredundant copy of the firmware image. If the active firmware image becomes corrupt, the controller will use the redundant firmware image and continue operating.
On-Line Spares: There is no limit to the number of spare drives that can be installed prior todrive failure. If a failure occurs, recovery begins with an On-Line Spare and data is reconstructed automatically.
DRAM ECC detects and corrects data bit errors.
Compeve DTP#: mrk001
